DTH Bit's bit has two types: integral bit and movable bit. The integral drill bit is also called a self-edge drill bit, and the drill bit and the drill rod are inseparable; the movable drill bit can be separated from the drill rod, which is flexible and convenient for disassembly and has a wide range of applications.
Bit types can be classified according to their chisel blade distribution:
 
Commonly used one-word bit, cross bit, column tooth bit and so on.
 
The common characteristics of the drill bits of these shapes are: the thickness of the drill bit body is large, the drilling is relatively round, it is not easy to stick, the force of the drill blade is in good condition, and the disadvantage is that it is difficult to manufacture and repair.
 
The straight bit is simple to manufacture and grind. It is suitable for drilling medium-hard and medium-hard rocks. However, in ore rocks with well-developed joints and fissures and greater toughness, the sticking effect will be poor. There are two types of in-line drill bits, hollow and solid, in brittle rock, the drilling efficiency of the hollow in-line drill bit is higher than that of the entire in-line drill bit.
 
Cross drill bits are more complicated to manufacture and grind than flat drill bits, and the consumption of cemented carbide chips is also higher. It is suitable for heavy-duty Water Well Drilling Tools to drill hard rocks, especially in rocks with developed joints and fissures. Brazing.
The column tooth bit and the cemented carbide sheet are at an angle of 105° and 75°. It can ensure the roundness of the drilled hole, but it is difficult to manufacture. It is mainly used for large-diameter, medium- and deep-hole drilling.