Recently, the high-pole lights in many places need to be repaired. One is because the high-pole lights have a long history and are in disrepair. Second, the replacement of the high-pole lights requires major surgery. It is not a simple replacement of parts. The size used is inconsistent with the current product size, so Led Ufo Lights Manufacturers needs to make a major replacement.
         The fixed type of high pole lamp requires manpower or a crane to be used for the top maintenance, and the lift type lowers the lamp panel to the bracket for maintenance on the ground. If the cable of the lift-type high pole lamp is torn off due to excessive tension, the operator must also rise to the top with the lamp panel, put the cable from the top to the bottom, and then the bottom operator pulls the cable together with a thick rope, and finally the cable end Fixed on the electrical board. This operator must wear safety ropes. According to the recommendations of our after-sales installation team, the high pole lamp should be raised and lowered when it rises to the top. It is best not to rise all the way to the top to prevent the hook from being difficult to hook the hook ring. After the lamp panel is hung up, it is necessary to separate the wire ropes and cables manually to avoid entanglement during the next maintenance and lowering of the panel. If the bolts of the embedded parts of the high pole lamp are difficult to unscrew, you can pour a little diesel and wait for a while and then tighten them.
       Our company has been producing high-pole lights for many years, and we have repaired many high-pole lights. Some time ago, we encountered dozens of high-pole lights from Hangqian Expressway. The maintenance cost was extremely high. It is more troublesome to require cranes and some equipment, so the cost of the high pole lights of China 200W Led Flood Light Factory is also very high.