Fine Mist Sprayer Pump Suppliers Introduces How To Use The Spray Pump Head

Comments · 747 Views

Fine Mist Sprayer Pump Suppliers introduces the knowledge of cosmetic spray pump heads:

 

Fine Mist Sprayer Pump Suppliers introduces the knowledge of cosmetic spray pump heads:

1. Dispensing machines can be divided into two types: plunger type and screw type. In terms of function, it can be divided into spray, foundation cream, lotion pump, aerosol valve, and vacuum bottle.

2. The size of the spray pump is determined by the diameter of the matching bottle. The standard of spray is 12.5mm-24mm, and the water output is 0.1ml/-0.2ml/time. Generally used in the packaging of perfumes, gel water and other commodities. The length of the same caliber can be determined according to the height of the bottle body.

3. The standard scale is 16ml to 38ml, and the water output is 0.28ml/time-3.1ml/time. It is generally used for creams and washing products.

4. Special spray pump, such as foam pump head and manual button nozzle, foam pump head is a kind of non-inflatable hand-pressed pump head, it does not need to be filled with air to foam, and it can produce a certain amount of water with just one touch. of high-quality foam. Usually comes with a special bottle. Manual button nozzles are often used for cleaners and other goods.

5. The composition of the distributor is relatively messy, generally including: dust cover, chuck, chuck rod, gasket, piston, tension spring, valve, bottle cap, pump body, straw, valve ball (steel ball, glass ball) . Caps and dust caps can be painted, electroplated, and covered with anodized rings. Because a set of pump heads involves a lot of molds, and the order quantity is large, the less order quantity is 10000-20000.

6. The thermos bottle is generally cylindrical, the standard is 15ml-50ml, and a single bottle is 100ml. The whole capacity is very small, relying on the principle of atmospheric pressure, which can prevent cosmetics from being contaminated during use. Thermos bottles include anodized aluminum, plastic electroplating, and colored plastic, and the quotes are more expensive than other common containers, so the demand for quantity is generally not high.

7. Dispensing machine customers rarely open their own molds, so more molds are needed, and the cost is higher.

Through the above introduction, Mini Trigger Sprayer Suppliers hopes that you can simply refer to the content of this article in future use.

 

Comments