Black Diamond Petrol Log Splitter Should Be Well Maintained

Comments · 1701 Views

First, the Black Diamond petrol Log Splitter and the leaf shredder should be maintained, which will directly affect the life of the equipment and the maintenance cost.

 First, the Black Diamond petrol Log Splitter and the leaf shredder should be maintained, which will directly affect the life of the equipment and the maintenance cost. In addition to troubleshooting various faults, post-season maintenance should also focus on the following items:
 
The equipment inspection must be carried out under absolute power failure.
 
1. Lubrication inspection: check each bearing and lubrication parts and add lubricating oil. If it appears dry and hard, it can be disassembled and cleaned with kerosene, and then refilled with lubricating oil.
 
2. Vulnerable parts inspection: check the fixed knife, movable knife, hammer, split pin, threading shaft and other parts in contact with the material, as well as whether the V-belt is worn, damaged, or missing. If found, replace it immediately. (The hammer pieces are individually worn or deformed, and all need to be replaced, otherwise it will destroy the equipment's dynamic balance and affect the use.)
 
3. Fastener inspection: check all bolts and nuts inside and outside the equipment, and lock them in time if they are loose.
 
4. Rotor inspection: Rotate the rotor by hand to check whether the rotor has abnormal noise or jamming, and eliminate it in time.
 
5. Tire inspection: Check whether the tires are damaged, aging, insufficient tire pressure, inflexible rotation, etc. If there is a fault, it needs to be eliminated or replaced in time.
 
6. Power part inspection: check whether the electric motor (diesel engine, gasoline engine), hydraulic system, electric circuit and oil circuit are unobstructed, and whether there are aging problems.
 
7. Cleaning and inspection: clean up the remaining material in the crushing bin, check whether there are hard objects such as masonry, iron, etc., clean the screen if there is a sieving equipment, and remove dust and clean the dirt outside.
 
   After various inspections and maintenance are completed, it can be turned on and run for 10 minutes, and the equipment can be put into storage after it is normal. The post-season maintenance of the Black Diamond petrol Log Splitter and the leaf shredder is very important to repair faults in time to avoid errors in work handover, keep the equipment in the best condition, and lay a good foundation for the next season.

Comments