The Reliability Of Automotive Interior Plastic Parts For Material Selection

Комментарии · 706 Просмотры

When selecting materials for auto die casting molds, the principle of economy must be considered to reduce manufacturing costs as much as possible.

 

(1) To meet the requirements of working conditions

1. Wear resistance

When the blank is plastically deformed in the cavity of the automotive interior plastic parts mold, it both flows and slides along the surface of the cavity, causing severe friction between the surface of the cavity and the blank, resulting in the failure of the mold due to wear. Therefore, the wear resistance of the material is one of the basic and important properties of the mold.

Hardness is the main factor affecting wear resistance. In general, the higher the hardness of the mold parts, the smaller the amount of wear and the better the wear resistance. In addition, wear resistance is also related to the type, quantity, shape, size and distribution of carbides in the material.

2. Strong toughness

Most of the working conditions of the mold are very bad, and some often bear a large impact load, which leads to brittle fracture. In order to prevent sudden brittle fracture of mold parts during operation, the mold must have high strength and toughness.

The toughness of the mold mainly depends on the carbon content, grain size and organizational state of the material.

3. Fatigue fracture performance

During the working process of the mold, fatigue fracture is often caused under the action of cyclic stress. Its forms include small-energy multiple impact fatigue fracture, tensile fatigue fracture, contact fatigue fracture and bending fatigue fracture.

The fatigue fracture performance of the mold mainly depends on its strength, toughness, hardness, and the content of inclusions in the material.

4. High temperature performance

When the working temperature of the mold is higher, the hardness and strength will decrease, resulting in early wear of the mold or plastic deformation and failure. Therefore, the mold material should have high anti-tempering stability to ensure that the mold has high hardness and strength at working temperature.

5. Heat and cold fatigue resistance

Some molds are in a state of repeated heating and cooling during the working process, which causes the surface of the cavity to be subjected to tension, pressure and stress, causing surface cracking and peeling, increasing friction, hindering plastic deformation, and reducing dimensional accuracy, resulting in Mold failure. Hot and cold fatigue is one of the main forms of hot work die failure, and the helper die should have high resistance to cold and heat fatigue.

6. Corrosion resistance

When some molds such as plastic molds are working, due to the presence of chlorine, fluorine and other elements in the plastic, strong corrosive gases such as HCI and HF are decomposed after heating, which erodes the surface of the mold cavity, increases its surface roughness, and aggravates wear and failure.

Plastic Injection Mould Price

(2) Meet the process performance requirements

The manufacture of molds generally has to go through several processes such as forging, cutting, and heat treatment. In order to ensure the manufacturing quality of the mold and reduce the production cost, the material should have good forgeability, machinability, hardenability, hardenability and grindability; it should also have small oxidation, decarburization sensitivity and quenching properties. Deformation and cracking tendency.

1. Forgeability

It has low hot forging deformation resistance, good plasticity, wide forging temperature range, low tendency for forging cracking and cold cracking and precipitation of network carbides.

2. Annealing technology

The spheroidizing annealing temperature range is wide, the annealing hardness is low and the fluctuation range is small, and the spheroidizing rate is high.

3. Machinability

The cutting amount is large, the tool loss is low, and the machined surface roughness is low.

4. Oxidation and decarburization sensitivity

When heated at high temperature, it has good oxidation resistance, slow decarburization, insensitivity to heating medium, and small tendency to pitting.

5. Hardenability

It has a uniform and high surface hardness after quenching.

6. Hardenability

After quenching, a deep hardened layer can be obtained, which can be hardened by using a mild quenching medium.

7. Quenching deformation cracking tendency

The volume change of conventional quenching is small, the shape is warped, the distortion is slight, and the abnormal deformation tendency is low. Conventional quenching has low cracking sensitivity and is not sensitive to quenching temperature and workpiece shape.

8. Grindability

The relative loss of the grinding wheel is small, the limit grinding amount without burn is large, and it is not sensitive to the quality of the grinding wheel and cooling conditions, and it is not easy to cause abrasion and grinding cracks.

(3) Meet the economic requirements

When selecting materials for auto die casting molds, the principle of economy must be considered to reduce manufacturing costs as much as possible. Therefore, on the premise of satisfying the performance, first choose the lower price, carbon steel can be used without alloy steel, and production materials can be used without imported materials. In addition, the production and supply situation in the market should also be considered when selecting materials. The selected steel grades should be as few and concentrated as possible and easy to purchase.

 

Комментарии