The Structure Of The Barrel Mold

Comments · 1609 Views

When decorating a house, Bucket Moulds are usually used to paint the walls, and the plastic buckets for paint are usually produced in batches with paint bucket molds.

When decorating a house, Bucket Moulds are usually used to paint the walls, and the plastic buckets for paint are usually produced in batches with paint bucket molds.

The structure of the plastic mold is as follows:

The mold adopts the I-shaped structure, the cavity and core are P20 or 2738, the slider, the guide chute, and the insert are 2316 or 718, and the guide post, guide sleeve, sprue sleeve, pull rod, and reset rod use SKD standard parts. , The mold base adopts a self-made standard mold base. Make polishing easier, thereby saving production cycle, extending mold life, reducing maintenance and repair time, reducing the risk of cracking, and improving production efficiency.

Mold cooling system design:

The design of the cooling system is a relatively complicated task, that is, the cooling effect and uniformity of cooling must be considered, and the influence of the cooling system on the overall structure of the mold must be considered. The cooling system and size determination; key parts such as movable molds or inserts Cooling; cooling of side sliders and side cores; design of cooling elements and selection of cooling standard elements.

We are a Paint Bucket Mould manufacturer, welcome to consult and contact us.

Comments