There are many things to pay attention to when hydraulic accessories are in operation. Take the internal gear pump accessories as an example. Before operation, check whether the equipment is installed carefully and complete. The pressure liquid can only be filled with the filter at a small volume rate. Pay attention to the arrow in the direction of rotation, no load, and no pressure. Run it for a few seconds to obtain sufficient lubrication. Next, Hollow Hex Plug Company introduces what matters should be paid attention to when hydraulic accessories are in operation?

1. Large working pressure range. Different types of pump accessories can be selected to obtain different pressure areas, and the input air pressure and output air pressure can be adjusted accordingly. Can reach high pressure, gas 90Mpa

2. Wide flow range. For all types of pump accessories, only 0.1Kg of air pressure can work smoothly. At this time, a smaller flow rate can be obtained, and different flow rates can be obtained after adjusting the intake air.

3. Easy to control, from simple manual control to complete automatic control can meet the requirements.

4. Automatic restart, no matter what causes the pressure of the pressure holding circuit to drop, it will automatically restart to supplement the leakage pressure and keep the circuit pressure constant.

5. Safe operation, gas-driven, no arc, no spark, can be used in dangerous situations.

6. Large energy saving up to 70%, because maintaining pressure does not consume any energy.

Through the above introduction, Banjo Elbow Manufacturers hopes that you can simply refer to the content of this article in future use.