1.Remove the collet. Using your fingers, extract the collet from the mouth of the quick fitting.
2.Pull the O-ring out of its well. To remove the O-ring from the well, locate a thin, flat tool. Tweezers, a toothpick, or a nail file will all be able to reach down and loosen the O-ring.
3.Tamp a new O-ring into the fitting. Using a piece of tubing, push the new O-ring into the fitting. Push on the tubing until the O-ring flattens and stays in place.
4.Slide the collet back into the fitting. Replace the collet into the fitting, and your quick-connect fitting is back in action.
The push fit fitting is one of our products, welcome to your come and purchase!
