Everyone should be familiar with bearings. In the age of industrialization, bearings are very important. Therefore, the bearing supplier has continued to grow and develop over the years. Today we talk about deep groove ball bearings.

Deep groove ball bearings are the most representative rolling bearings. Compared with other types of bearings of the same size, this type of bearing has a small friction coefficient, high limit speed, simple structure, low manufacturing cost, high precision, no frequent maintenance, large size range, and many forms, and it is the most widely used type. Bearing. It mainly bears radial load but also can bear a certain axial load. When it only bears the radial load, the contact angle is zero.

After the deep groove ball bearing is installed on the shaft, the axial displacement of the shaft or the housing can be restricted within the axial clearance of the bearing, so it can be axially positioned in both directions. When the deep groove ball bearing has a large radial clearance, it has the performance of an angular contact bearing and can bear a large axial load. Under high-speed operating conditions with large axial loads, deep groove ball bearings are more advantageous than thrust ball bearings. In addition, this type of bearing also has a certain degree of self-aligning ability. When it is inclined 2'～10' relative to the housing hole, it can still work normally, but it will have a certain impact on the life of the bearing.

The above is a brief introduction to deep groove ball bearings.