1. The minimum service life of Armchair Mould.

　　The normal service life of Armchair Mould molds should reach at least 500,000 or more. Therefore, the quality of steel is very important. Some injection mold companies provide low-quality steel to save costs and provide cheaper prices for customers, but when customers are in When the factory buys molds, problems may occur after a few months. In order to maintain the good quality of Armchair Mould, we usually recommend customers to use 718H or P20 mold steel. This can ensure that at least 500,000 molds can be used continuously

　　2. The mold clamping time of the plastic chair mold during the production process.

　　This is another important issue for your Armchair Mould project and a simple issue for all other custom injection molds because you know that a short cycle time can produce more chair molded parts, which will increase your profit. There are two main points to increase the cycle time we need to pay attention to. One is to make the mold structure of the plastic chair mold good, and a good structure can make the mold run smoothly. The other is the most important thing is cooling. Reducing the cooling cycle time is the first point, so When purchasing a custom plastic chair mold from your supplier, you need to change the cooling channel design in the mold drawing to ensure that your mold manufacturer has designed a perfect cooling method in the mold, according to our plastic chair molding experience, It can run a perfect cooling water system on a 1.8-2.5kg plastic chair mold, and the cycle time of the entire chair mold will be the 40s to 50s.

　　3. How to optimize the weight of the molded plastic chair but the strength remains unchanged.

　　At the beginning of the plastic chair product design, we should analyze to reduce the weight to obtain good strength. When you have a plastic chair project in your hand, you need to change the competitive advantage in advance, such as the weight and price of the parts, to minimize the product. Reducing weight, but maintaining the strength of the plastic chair is the best way to help you win the market because reducing weight means saving costs and shortening cycle time. In order to improve this, we have some suggestions, such as adding some ribs below the ribs at the bottom of the chair. When designing the chair, we can check the stacking of the chair in the software to avoid chair stacking problems in the future.

　　Hope this information is sufficient for your reference. If you want to know more details about this welcome item, please contact us,

　　If you have any customized Armchair Mould and are looking for a mold manufacturer to produce it for you, welcome to send us your quotation request,

　　We have more than ten years of experience in the manufacture of customized Armchair Mould and Basket Mould. We provide fluent English technical communication service (which is very important for the smooth running of your project), good quality and competitive price,