I Know Copper Magnet Wire And Copper Clad Aluminum Wire

Comments · 1231 Views

Copper Clad Aluminum Wire is different from copper magnet wire.But each of them,our company all have.

Do you know about Copper Clad Aluminum Wire. Like most industries, the wiring industry doesn’t change instantly. As new technologies come onto the scene they must prove their value over time before they become accepted. For a long time copper-clad aluminum cable (CCA) has been met with skepticism by many professionals. However new evidence is proving that CCA has definite benefits over pure copper in certain applications.

A Closer Look at Solid Copper

For well over a century solid copper has been the standard for many different wiring applications. Methods of insulating cables and connectors have both changed and advanced over the years, but the use of copper conductors hasn’t changed since the first electric wiring systems were used back in the 1800s. That’s because copper is naturally highly conductive and has low resistance. But it comes at a price, literally. Copper is among the most widely used metals today, and it’s the only one used commonly as a conductor. That kind of demand gives copper a very expensive price tag. Copper can cost as much as three or four times that of aluminum.

All the Advantages of Copper for Less

While Copper-clad aluminum isn't always the best solution, when installing communication cables CCA allows cables to utilize all of the benefits that copper has to offer, while maintaining a much more affordable price tag and helping to protect the world’s limited supply of copper. CCA is made by bonding a layer of pure copper onto an aluminum core. While drawn our CCA obviously contains less copper than pure copper cable, it delivers virtually the same conductivity with only slightly higher resistance. How is this possible? It has to do with an electrical phenomenon known as “skin effect.”

Skin Effect

Skin effect is the tendency of an alternating current at high frequencies (the current used in Cat5e and Cat6 cables for data transfer) to become distributed in a conductor so that there is more current density near the surface (or skin) of the conductor. This density decreases as you go deeper into the conductor. Because skin effect only happens at high frequencies, it's better to use pure copper cable in all low frequency applications, such as your home power cables.

Copper Clad Aluminum Wire is different from copper magnet wire.But each of them,our company all have.

Comments