With the wide application of mechanical equipment, clasp type high quality fc1501 is more and more widely used in the field of track maintenance. In order to keep high quality fc1501 in working condition, we need to carry out daily maintenance, the following are some common maintenance methods.

Regular cleaning

Because the working environment of high quality fc1501 is generally harsh, it needs to be cleaned regularly to avoid the accumulation of dust, oil and other debris affecting the work effect. Before cleaning, it is necessary to turn off the power, stop the air supply to the air compressor, and use a wet towel or brush to remove the debris on the surface.

oiling

In order to maintain the flexibility and stability of the high quality fc1501, it is necessary to apply oil once a month. When applying, it is necessary to clean the original lubricant on the surface of the pressure plate, and then apply. Be careful not to apply too much lubricating oil, so as not to pollute the working environment.

Inspection nut

Due to the high operating frequency of the high quality fc1501, prolonged vibration may cause the nut to loosen. Therefore, it is necessary to check the fastening state of the nut once a month and tighten it in time.

Check gas filter

The high quality fc1501 requires the use of compressed air for work, and the condition of the air filter needs to be checked before use. If the filter is blocked or damaged, it needs to be replaced or repaired in time to ensure the quality of compressed air.

Check wiring and electrical equipment connections

The electrical equipment in the high quality fc1501 requires regular inspection and maintenance to ensure their reliability and safety. Turn off the power and check the condition of the wires and connectors. If loose or damaged, it needs to be repaired or replaced.

Storage and maintenance

When the high quality fc1501 is not used for a long time, it needs to be properly stored and maintained. It can be stored in a dry environment and applied with a small amount of lubricating oil. A full inspection of the high quality fc1501 is required to ensure that all parts are in normal condition before folding.

high quality fc1501 https://www.hbrailwayfastening.com/FC1501