For printing, most customers do not know how to operate, so many customers will be confused about why there is a color difference in the printing process, why the effect of printing in some positions of the same album is always poor. So what do we need to consider when printing the album? What is the printing process of the album?

dtf adhesive powder factory white hot melt powder Material: Adhesive powder factory is adhesive powder factory white hot melt powder Material: Adhesive powder Factory White hot melt powder Material: Adhesive powder Factory White hot melt powder Material: Adhesive powder factory white hot melt powder Material: Adhesive powder factory white hot melt powder material 105g coated paper, 128g coated paper, 157g coated paper, 200g coated paper, 250g coated paper, 300g coated paper. Most corporate brochures will use 200g as the cover and 157g as the inner page of the paper material for printing, which is easy to print and the price is low. There are also special cover paper, inner coated paper materials, there are also a special paper printed corporate brochures.

Album inside page printing

dtf adhesive powder factory white hot melt powder. Adhesive powder Factory white hot melt powder. Adhesive powder Factory White hot melt powder.

dtf adhesive powder factory white hot melt powder Size: Usually see the size of the album is 16 open, that is, 210×285mm, the reason is that this size saves paper, standard generous paper is 889×1194mm, a generous paper can just print 16 pages, so it is called generous 16 open.

General book size is slightly different, books are printed on standard positive paper, positive size is 787×1092mm, 16 open size is 185×260mm, so most of the fiction and prose books we see in the library are this size.

dtf adhesive powder factory white hot melt powder phase: The process of finishing the film and proofing is calculated per P. Design, film production, proofing, printing, and assembly are generally measured in A4 (210×285㎜). Film is the necessity of the machine, printing proof is the basic basis for the color check of the collar machine.

dtf adhesive powder factory white hot melt powder Middle stage: The key link of printing is printing. The valuation standard is color ream, that is, each color per ream of paper. The printing starts from 5 ream in the open, and the calculation is 5 ream if the value is less than 5 ream. If there is a spot color, such as enterprise special pattern printing spot color (pantone ink) or printing gold, printing silver, etc. Please be sure to indicate, then it will be increased from 4 colors to 5 colors, 6 colors, so that the price is accurate.

dtf adhesive powder factory white hot melt powder Post-production: Usually the processing work after the printing of the printed product. Be sure to indicate: binding (riding nails or glue nails), whether the post-press process has film or UV, die cutting, gold stamping and embossing area should also be written clearly, special materials for printing, packing quantity if there are special requirements. The more specific and accurate the process is, the more accurate the price will be.

Note the following when printing: 1. The distance between the bleeding line and the adhesive powder factory white hot melt powder page and the text must be 3mm from the cutting edge to avoid being cut. 2. Use of color blocks: In color printing, please try to avoid the combination of dark color or full plate color when matching color blocks, otherwise it is easy to produce back printing after printing. Do not cover with white color blocks, so as not to cause trouble when combining. 3. Printing background color: dtf adhesive powder factory white hot melt powder background or background color should not be less than 10% to avoid failure to present the finished product when printing. 4. Wire frame thickness: dtf adhesive powder factory white hot melt powder The wire frame thickness of all input or self-drawn graphics cannot be smaller than 0.1mm. Otherwise, the printed materials may break cables or fail to be presented. In addition, the wire frame can not be set "scale with the image", otherwise the print output will form irregular lines.

dtf adhesive powder factory white hot melt powder Details: During printing design, designers should try their best to use one or two adhesive powder factory white hot melt powder primer colors. Avoid adhesive powder factory adhesive powder factory adhesive powder factory White hot melt powder primer colors. The adhesive powder factory adhesive powder factory adhesive powder factory White hot melt powder primer colors should be adhesive powder factory adhesive powder factory white hot melt powder primer colors. The choice of color should be natural, and there should be harmony when it is excessive and changing, if the difference between the two shades is too large, it will also make people feel uncomfortable and uncomfortable, so the designer must use color cleverly when designing to highlight the focus of the expression of the album, and mobilize the reading interest of consumers through visual effects.

In addition, in the selection of spot color tones, we should follow the unity, in line with the connotation of the album. When printing, it is also necessary to ensure the consistency of the original tone as much as possible. In this way, the artistic effects of dtf adhesive powder factory white hot melt powder can be effectively improved to achieve the purpose of publicity.

dtf adhesive powder factory white hot melt powder https://www.suzhoulongterm.com/dtf-adhesive-powder-factory-white-hot-melt-powder.html