Introduction of Propeller Shaft | #Propeller Shaft

Introduction of Propeller Shaft

The propeller shaft is a rotating body with high speed and less support, so its dynamic balance is very important. Generally, the propeller shaft must undergo a dynamic balance test before leaving the factory and be adjusted on the balance machine.

Types of Spindle Shaft | #Spindle Shaft

Types of Spindle Shaft

The spindle shaft is a motion shaft that drives the tool or workpiece to rotate on the machine tool to produce cutting motion. According to the driving mode of the spindle shaft, the machine tool spindle can be divided into two categories: mechanical spindle and electric spindle.

What are the Processing Methods for Spline Shaft? | #Spline Shaft

What are the Processing Methods for Spline Shaft?

There are many processing methods for spline shafts. It mainly adopts cutting processing methods such as hobbing, milling and grinding, as well as plastic deformation processing methods such as cold hammering and cold rolling.

Classification of Motor Shaft | #Motor Shaft

Classification of Motor Shaft

The shaft is an important part of the motor, as the link of electromechanical energy conversion between the motor and the equipment, supporting the rotating parts, transmitting the torque and determining the relative position of the rotating parts to the stator.

Motor Shaft's Efficiency After Alignment | #Motor Shaft

Motor Shaft's Efficiency After Alignment

Proper motor shaft alignment increases the operating life span of rotating machinery. To achieve this goal, components that are the most likely to fail must be made to operate within their acceptable design limits.