Introduction Of Wholesale Dry And Wet Vacuum Motor

Comments · 455 Views

The Wholesale Dry and wet vacuum motor vacuum cleaner is a must-have equipment for every home, and it is also the largest type of vacuum cleaner motor.

 

The  Wholesale Dry and wet vacuum motor vacuum cleaner is a must-have equipment for every home, and it is also the largest type of vacuum cleaner motor. Today, in order to better help friends master some situations of vacuum cleaner motors, I will introduce some working principles and applications of vacuum cleaner motors for your reference.

Household vacuum cleaners: All kinds of vacuum cleaners produced at home and abroad work on the same principle. Driven by the high-speed motor of the vacuum cleaner, the blades in the impeller continuously work on the air, so that the air in the impeller gains kinetic energy and is discharged from the fan at a very high speed. The dust removal air in front of the other fan continuously fills the air in the impeller, resulting in a flash vacuum in the dust removal area, that is, a high negative pressure difference is generated in the dust removal area under the action of the outside world. air pressure. Under the action of the negative pressure difference, the suction nozzle brings a cyclone into the vacuum cleaner from a place close to the garbage and dust, and the interior of the vacuum cleaner passes through the filter screen, and the garbage and dust reach the dust collection box. After thinking about it, the vacuum cleaner came out again and entered the room, and the entire dust removal process was completed here.

Different models, specifications and models of electric vacuum cleaners have different structural and functional characteristics. Therefore, the purchased vacuum cleaner must read the instruction manual carefully before use, so as not to damage the life safety due to the wrong operation of the vacuum cleaner, and seriously endanger the life safety. The vacuum cleaner should be no more than 1000m above sea level, with good natural ventilation, and the working temperature should not exceed 40 °C. Air is not flammable and will corrode vapors in a dry manic room or similar natural environment.

Home application of the vacuum cleaner: First, the hose should be securely connected with the suction port of the housing, and the hose should be connected with the long butt joints of each section and the suction nozzles at the butt end, such as furniture brushes, gap suction nozzles, and floor brushes, and then rotate quickly. Due to the few air inlets of the gap nozzle, the noise during construction is large, and the continuous construction time cannot be too long.

Application of household vacuum cleaner: According to the place to be cleaned, the suction power can be adjusted appropriately to operate the equipment. The elbow has a round hole with an adjustment ring on it. When the adjustment ring covers the holes on the elbow, the suction is greater, and when the adjustment ring exposes all the holes, the suction is less. Some vacuum cleaners choose to change the motor speed to adjust the suction power. When a large amount of garbage is found in the dust storage tank, in addition to garbage removal, the dust accumulated on the filter should also be removed, and a stable ventilation channel should be maintained to prevent the filter from being blocked, which will cause the suction power to not decrease and the motor of the vacuum cleaner to change. hot,

After the vacuum cleaner is used at home for a period of time: because too much dust accumulates, worrying about carrying it will cause the suction power to drop. At this time, you can shake the dust rack on the vacuum cleaner for extraction maintenance. If the unstable ash rack still cannot be repaired by suction, it means that the dust in the bucket is full and should be removed immediately. During normal use, be careful not to let the vacuum cleaner get wet, and you cannot operate the equipment. If the cleaning area uses large strips of paper, paper, plastic film, or exceeds the size of the suction pipe, it should be cleaned up in advance, otherwise the suction pipe may be easily blocked.

This is some information about the vacuum cleaner motor introduced by Brushless motor suppliers. Hope you can refer to it. It is believed that effective application will undoubtedly produce very, very good application effects of vacuum cleaner motors, creating a comfortable daily life experience.

 

Comments