Sealing strips are divided into many shapes according to the needs of customers, and different shapes have different installation methods. Below, the Custom Silicone Tray Mold Manufacturers introduces that it can be divided into 4 categories according to the installation methods:

1. Embedded fixation: It is fixed by the hook teeth of the sealing strip structure embedded in the groove.
2. Fix with adhesive or tape: paste double-sided tape or glue on the joint part of the sealing strip and the object, remove the isolation paper during installation, and install the sealing strip in the designated part of the seal.
3. Fix with foam nails: Drill nail holes on the sealing strip to install foam nails. When installing, install the sealing strip with bubble nails at the nail holes of the object.
4. The clamping part is fixed: the clamping part of the sealing strip itself is clamped at the installation part of the object and fixed. The clamping part can be composed of skeleton and rubber or can be composed of rubber.

Through the above introduction, Silicone Kitchen Mold Manufacturers hopes that you can simply refer to the content of this article in future use.