Usually, the leakage of sink faucets is nothing more than these situations. If you can use these methods, you can solve the leakage of Sink Faucets.
- Water leakage at the water outlet:
Use pliers to loosen and remove the gland bolt, take out the shaft washer with a clip, and replace it with a new shaft washer.
- Water leakage from the gap in the lower part of the faucet:
Loosen the screw to remove the bolt head, then loosen the gland and remove it, then take out the triangular seal on the inside of the gland and replace it with a new one.
- Water leakage at the joint of the pipe:
Solution: At this time, you can re-tighten the cap nut or replace it with a new U-shaped gasket.
- Press-type faucet leaks:
Close the water inlet valve and remove the small screw above or behind the faucet handle to remove the handle attached to the faucet body. Remove the handle to view the parts of the faucet. Use large carp pliers or an adjustable wrench to remove the packing nut, being careful not to scratch the metal. Rotate the spool or shaft in the same direction you turn the faucet to unscrew them. Remove the screw securing the washer. If necessary, use penetrating oil to loosen the screws. Check the screws and valve core and replace them with new ones if damaged. Replace the old gasket with a new one that is exactly the same. A new gasket that matches the old gasket almost exactly will generally keep the faucet from dripping.
Yuhuan Difeng Brass-Plastics Industry Co., Ltd. is a Brass Shower Faucets manufacturer in China. The company specializes in Sink Faucets, Kitchen Faucets, and other products.
