When the Rice Planting Machine is harvesting on sandy soil or soil with moderate temperature, remove the swing screen at the rear of the Rice Planting Machine and install the rotating cage. Then tighten the cage fixing bolts, connect the machine to the tractor, and connect the two hydraulic pipes of the collection box to the tractor's hydraulic output valve.

　　The operation method is basically the same as that of a non-stacker. Potatoes fall from the potato soil separation chain, enter the rotating promotion cage, and are automatically promoted to the upper part of the conveyor belt and fall on the conveyor belt. Then, the conveyor belt is sent to the collection box. After the collection box is installed, hoist the tractor, manipulate the tractor's hydraulic handle, and use the hydraulic cylinder to tilt the collection box to pile the potatoes into a pile, and then manipulate. The hydraulic handle lowers the collection box and hangs the tractor on the gear to continue the harvest.

　　Rice Planting Machine is an irreplaceable driving force in agricultural production. Especially in recent years, driven by the principle of buying machinery subsidies, farmers' enthusiasm for buying machinery and growing food has increased. At present, in the winter season, many Rice Planting Machines are idle, especially in the rain and snow, Rice Planting Machines are easily aging and damaged.

　　 In order to extend the service life of the Seeding Machine, the following common sense should be paid attention to: Clean the lubricant. Always pay attention to the use of clean lubricants that meet machine specifications. The filter element of the oil filter should be cleaned regularly. The inner wall of the rotor should be pasted with a layer of kraft paper of appropriate width and length to facilitate the dust absorption under centrifugal action. The cooling water should be clean. Soft water is more suitable for cooling water, such as snow, rain or treated tap water and clean well water. When the cooling system is clean, add 1% caustic soda and 0.5% oil in proportion to the amount of water.

　　When the idea is working, the cylinder sucks in 2-4 cubic meters of air per minute. In order to ensure that the air entering the cylinder is clean, it is necessary to check the air filter regularly. Fuel network. At present, many soil harvesters are based on diesel engines, so the purification of diesel is very important. Seeding Machine mainly works in the field, and is often exposed to dust, sediment, and water, and the body is more likely to get dirty. Therefore, it must be wiped frequently to avoid rust.