Lavatory Cabinet Suppliers Introduces The Process Of Using The Sink

Comments · 741 Views

Lavatory Cabinet Suppliers Introduce Classification and different ways of using Handmade Sink :

 

Lavatory Cabinet Suppliers Introduce Classification and different ways of using Handmade Sink :

1. Bathroom sinks are generally made of ceramics, glass, and other materials. Two points need to be paid attention to:

① The sink should not be too shallow, otherwise, the water splashes easily.

② It is recommended to make an under-counter basin so that there is no gap between the sink and the countertop, which can avoid the situation that the gap between the sink and the countertop can hide dirt.

2. Kitchen sinks are generally made of stainless steel. Two main points should be paid attention to:

① Do not place iron products that are easy to rust around the sink, and do not place chlorine-containing products such as bleach and chemical detergents near the sink. After using the sink, try to dry it as much as possible, and do not let water droplets remain on the surface of the sink, otherwise, the sink will be easily lost and rusted.

② it is best to install a large single tank for the sink, although the double sink is more finely divided. But when you actually use it, you will find that the two slots of the double sink are relatively small, and the pot cannot be put in, which is particularly troublesome when brushing the pot. Or the big single slot is real, and any kitchen utensils can be put in.

Through the above introduction, Basin Faucet Wholesalers hopes that you can simply refer to the content of this article in future use.

 

Comments