Before installing the 100w outdoor slim led floodlight, check the explosion-proof type, type, grade, group, enclosure protection grade, installation method, and fastener requirements for installation from the label and explanation book.
 
1. Maintenance precautions for 100w outdoor slim led floodlight
1. Regularly eliminate dust and grime on the housing of 100w outdoor slim led floodlight, improve the light efficiency and heat dissipation function of the lamp;
2. The cleaning method can be based on the protective ability of the 100w outdoor slim led floodlight shell, using a water spray lamp to symbolize the shade or wipe it with a damp cloth;
3. When cleaning with water spray, the power supply should be cut off, and it is strictly forbidden to wipe the transparent parts of the plastic shell of the lamp with a dry cloth to avoid static electricity;
4. Check whether the transparent parts have been impacted by foreign objects, whether the protective net is loose, desoldering, corrosion, etc., if any, stop using it and repair and replace it in time;
5. If the light source is damaged, turn off the light and tell it to replace it in time to avoid the abnormal condition of the ballast and other electrical components for a long time because the light source cannot be started;
6. If there is water in the lamp cavity of the 100w outdoor slim led floodlight used in a humid environment, it should be cleared in time, and the sealing parts should be replaced to ensure the protective function of the shell;
7. When turning over the lampshade, follow the warning signs and open the lid after power off;
8. After opening the cover, check whether the flameproof contact surface is intact, whether the rubber seal is hard or sticky, whether the wire insulation layer is green and carbonized, whether the insulation and electrical components are deformed and burnt If these problems are found, they should be repaired and replaced in time. ；
9. Before closing the cover, use a damp cloth to avoid overheating and wiping the light return and transparent parts of the lamp to improve the light efficiency of the lamp. A thin layer of replacement anti-rust oil should be applied to the flameproof contact surface, and the seal should be paid attention to when closing the cover. Does the ring play a sealing role in its original position;
11. Some of the 100w outdoor slim led floodlight sealed should not be disassembled and opened frequently.
 
2. Led Street Light Factory introduces the installation considerations of 100w outdoor slim led floodlight
1. The installation of 100w outdoor slim led floodlight should ensure reliable fixing, the fastening bolts should not be replaced at will, and the spring washers should be complete;
2. The sealing ring for dust and water proof should be placed as it is when installing;
3. At the cable entry, the cable and the sealing gasket should be closely matched, the cross section of the cable should be round, and the surface of the sheath should not have high or low defects;
4. Excess cable inlets must be sealed according to the explosion-proof type, and the compression nut should be tightened to seal the cable inlets.