At present, plastic barrels are widely used in the market. Its raw material is mainly polyethylene. However, the specific production process depends on the manufacturer, which is one of the reasons for the wide variety of plastic drums on the market. 18L Bucket Mould Manufacturers introduces the selection requirements of plastic buckets?

First of all, when buying, pay attention to the packaging of the plastic bucket. According to relevant national regulations, after the plastic barrel is filled with liquid, a scientific test is required. A drop test is performed at a height of one meter, and then the plastic barrel is inspected for damage or leakage.

Secondly, it should be noted that the color of good quality plastic buckets is relatively pure, and the external gloss of plastic buckets can also be observed.

People can judge based on actual feelings. After pressing different parts of the plastic bucket by hand, the flat rebound speed of the better quality plastic bucket after compression will be relatively stable and rapid. At the same time, there will be no rebound phenomenon at excessive corners such as handles and bottom corners.

Through the above introduction, Paint Pail Mould Manufacturers hopes that you can simply refer to the content of this article in future use.