Pay Attention To The Use Of Corn Thresher

Comments · 334 Views

Hand push seeder has the characteristics of uniform seeding, consistent depth, stable row spacing

Hand push seeder has the characteristics of uniform seeding, consistent depth, stable row spacing, good soil covering, seed saving, and high work efficiency. The following points should be paid attention to when using the wheat planter correctly:

  1. Do maintenance work before entering the field. It is necessary to clean up the debris in the seeding box and the grass and dirt on the trencher to ensure that it is in good condition, and add lubricating oil to the driving and rotating parts of the tractor and wheat planter according to the requirements of the manual, especially before each shift Pay attention to the lubrication and tension of the transmission chain and the tightening of the bolts on the wheat planter.
  2. After the wheat planter is connected to the tractor, it should not be tilted, and the frame should be level before and after the operation.
  3. Make various adjustments. According to the regulations of the manual and agronomic requirements, appropriately adjust the sowing amount, the row spacing of the openers and the depth of the ditch covering wheel.
  4. Pay attention to adding seeds. Put the seeds in the seed box to ensure the effectiveness of the seeds. Secondly, at least add a seed box to cover the entrance of the seed box to ensure smooth seeding.
  5. Pilot broadcasting. In order to ensure the quality of planting, it is necessary to insist on trial planting 20 meters before planting in a large area and observe the working conditions of the wheat planter. Ask agricultural technicians, farmers, etc. It is necessary to check and consult, and confirm that they meet the local agronomic requirements, and then carry out large-scale planting.
  6. Pay attention to driving in a straight line at a constant speed. When choosing a walking route for operations, the machine should ensure the convenience of adding seeds and mechanical access. When planting, pay attention to the uniform linear motion, do not walk fast or stop halfway, so as not to miss the replay; in order to prevent the trencher from clogging, the wheat planter should be raised when walking, and the wheat planter should be raised when retreating or turning. .
  7. Horizontal sowing, avoid crushing the field forcefully, resulting in too shallow seeding depth.
  8. When planting seeds, always observe the working conditions of the seed metering device, opener, cover device and transmission mechanism. In case of blockages, soil, entanglement of grass and loose seed coverage, remove them in time. After parking, the tangled grass must be adjusted, repaired, lubricated or cleaned.
  9. When Corn Thresher is working, it is forbidden to retreat or make sharp turns. The raising and lowering of the wheat planter should be carried out slowly to avoid damage to the parts.
  10. During operation, the seeds in the seed box shall not be less than 1/5 of the volume of the seed box; or when the land is transferred, the seed box shall not be filled with seeds or other heavy objects.
Comments