We are one of the professional plastic mold manufacturers, among which Chair Moulds are one of our common products. The ordinary chair you see is not easy to make.
The manufacturing of chair molds is a very complex process. From the initial design, processing, assembly, debugging and other steps to the final practical application, the impact of each process on the quality of the chair mold must be considered throughout the life cycle. The details must be in place to improve the quality of the final chair mold.
1. Choose the right casting material, the quality of the material will directly affect the quality of the chair mold. It is very important to choose materials with good performance and heat resistance, so the products produced are the best.
2. The design of the chair mould should be scientific and reasonable. For technical researchers, if they want to design products that meet the current market needs, they must rationally design and use the most standard mold structure to complete the standard implementation of mold part quality, mold structure availability and technical processability.
3. The perfect quenching process is essential for the chair mould. The quenching step should be performed correctly. If one step is not performed correctly, the produced mold will have quality problems, which will make it impossible to use the chair mold or shorten its service life.
4. Mold assembly: Chair mold assembly is like an assembly machine. Every component and screw must not go wrong, otherwise the consequences will be very serious. If the light is insufficient, it will cause product defects and affect production. If it is serious, it will completely damage the mold and lead to scrap. Therefore, the assembly work must be very meticulous. During the assembly process, the cleaning of the mold must be blown off, especially the water channels and screw holes, to remove the iron filings inside.
5. Mold maintenance: chair mold maintenance is mainly maintenance during the production process. Every time the mold is used, it must be fully maintained, especially the rust prevention of the molded parts and the rust prevention of the main operating parts. Since the mold needs water during the production process, water may flow onto the mold during installation or disassembly, so make sure that the mold is dry, and then brush a layer of oil to protect the mold.
In addition, Cabinet Moulds are also one of our products. For details, you can visit our official website to learn more.