The benefits of installing Portable Easy Pop Up Gazebo:
 
  The windproof performance of commonly used awning materials is not ideal, and it will be more dangerous if it encounters strong wind. The cloth awning cannot withstand strong winds, while the plexiglass is a brittle material, which is easy to break. The strongest stainless steel awning at present also has the problem of loud noise when it rains.
According to the current house structure, it is impossible to open the window without the awning, which seriously affects the indoor air quality and the owner’s living environment. According to the current situation, a new type of awning product has been developed to meet the beautiful appearance. Under the premise, it can also guarantee anti-aging, anti-yellowing, anti-chemical, anti-corrosion, can withstand the impact of strong typhoon of level 12, can also filter 99% of ultraviolet rays, and has a design life of more than 20 years.
 
  After the high-quality awning is installed, it can effectively block ultraviolet rays harmful to the human body and block the sunlight out of the window. The heat exchange between indoor and outdoor is completed through outdoor air convection, which greatly reduces the load of the air conditioner and has a considerable power saving effect. Dangxi's windows can shorten the sunshine time by half, which can effectively save energy and protect the environment. When it rains, it will not rain at a height of two meters, which solves the problem that the window cannot be opened when it rains. Choosing a solid awning will choose a higher quality of life and a better living environment.

Precautions for installation of China Custom Sunshade Parasol:
 
  1. Before installation, check whether the size of the plate and the reserved amount are appropriate. Be sure to leave enough expansion gap. The expansion calculation formula is: the expansion coefficient of the plate length before and after the maximum temperature = total expansion gap.
 
  2. When screwing the self-tapping nails, maintain a uniform force, not only to compact the plate and the sealing tape, but also not to crush them with excessive force.
 
  3. After the board is installed, the protective film should be removed. Before installation, the protective film should be removed about 50mm to avoid clamping the protective film during installation.
 
  4. After the installation is completed, check to see if there is any water leakage with the spray test. The test process must be serious, carefully observe each part, and the hidden danger of water leakage must be solved immediately to avoid small troubles becoming major problems.