We have a complete product line, including one of the most well-known products, weighing transducer. Although weighing transducers are the most critical part of an electronic weighing system, they are also the most vulnerable to damage and will malfunction from time to time. We describe the symptoms that may indicate a failure of the weighing transducer that should be paid attention to, and provide a method to troubleshoot the failure of the weighing transducer.

　　Common causes of bending beam load cell failure include:

　　Broken cable

　　Loose wire fittings

　　Overloading the scale capacity—causes shock and deformation of the load cell

　　Lightning strike or power surge

　　Chemical substances or moisture enter

　　Mishandled

　　Symptoms of load cell failure may include:

　　Zero drift

　　Cannot calibrate and reset the scale

　　Unreliable reading

　　Unregistered weights

　　After eliminating the common causes of the failure of the bending beam load cell, resistance measurement is usually used to troubleshoot the failure of the load cell. Although this will reveal some information, it should be performed with one of the tests listed below to obtain a complete summary of the problem and perform economical load cell repair.

　　Tests to troubleshoot the bending beam load cell include:

　　Millivolt returns

　　Resistance reading

　　Leak test

　　Delta weighing/signal test

　　Tap test

　　Unknown color code

　　Unknown capacity

　　bending beam load cell is also our product, welcome to consult and purchase.