The Pu Air Hose connector is a device used to easily fix additional air hoses, pneumatic tools and other accessories to the air hose. The air hose connector is composed of a cam coupling. The ball bearing is pressed into the groove processed into the half of the male connector, and the female connector is fixed to the male connector assembly using a spring-assisted sliding ring. Sliding the lock ring makes it easy to loosen the air hose joint, thereby loosening the ball bearing and the male joint so that it can be ejected from the coupling. Machinists and #039; pneumatic wrenches and other tools that use compressed air usually have quick couplings. One of the many benefits of using air compressors and air tools is that many different air tools can be easily and quickly replaced. This is achieved through the use of air hose connectors. By installing the connector to the end of the air hose, the connector can be replaced repeatedly within a few seconds without losing the air pressure in the compressor box.

A diaphragm or check valve is designed inside the coupling to seal the air and prevent the air from escaping when no accessories are inserted into the coupling. By inserting the male connector into the air hose, the valve remains open to the connector to provide air for the tool or accessory. Before the air hose connector, pneumatic tools or accessories need to be directly connected to the air hose through a threaded joint. This makes the connection of pneumatic tools or accessories inconvenient, because the air pressure needs to be discharged and the compressor needs to be turned off to replace the pneumatic tools or accessories from the air hose. In order to eliminate the time-consuming and gas-consuming behavior of replacing pneumatic tools, mechanical The division installed a manifold on the compressor and removed several air hoses from the manifold. Each air hose has different types of pneumatic tools or accessories at the end to eliminate the need to change tools. If multiple air lines are used at the same time, this system usually results in air hose entanglement and aerodynamic loss.

There are many types and sizes of air pipe joints to meet most needs. The size of a large coupling can promote more air flow, so it should be used on a large-capacity air compressor to avoid discharging air from a smaller compressor. The size and style of all couplings and male thread counterparts must be the same so that the parts can be seamlessly connected.

Welcome to view our website to know more about Air Filter Regulator!