The production process of 250ml Plastic Lotion Bottle is commonly used in extrusion and blowing process, that is, the plastic raw materials are added to the extruder, the molten parison is extruded by heating, melting, and plasticizing, and then placed in the bottle mold for inflation molding, and after cooling and shaping, it is removed from the mold Take it out and repair the waste edge to get the finished product. This process is mainly used to produce polyethylene and polyvinyl chloride plastic bottles.

The lotion bottle is mainly used in the pharmaceutical bottle, cosmetic container, and chemical bottle packaging market. Through the spray nozzle control technology, the degree of dosage can be well grasped. Environmentally friendly and practical lotion bottle complete equipment: It consists of a durable bottle body and a replaceable bottom. The brand-new bag-in-bottle technology and the ordinary airless spraying structure replace the bottle with an airless squeeze that contains a separate, but must manually plug the aluminum foil bag into the bottle.

As a form of using water, the spray is mainly suitable for urging water. For example, in a very dry environment (desert, or air-conditioned room), or during regular makeup, the makeup artist may use the spray because it is not easy to apply makeup on the face or spray the spray onto the sponge to get powder. , The purpose of fanning. The manufacturing principle of the lotion bottle is to form a high-pressure system in the bottle, and the liquid in the bottle is sprayed out in the form of extremely fine water particles with a higher pressure drop. Because the sprayed water particles are very similar to the natural mist in effect and form, this kind of bottle is called a lotion bottle.

Taizhou jinfu Packaging Technology Co., Ltd is a manufacturer specializing in lotion bottles, spray bottles, foam bottles, Food Packaging Bottle, and other products. If you are interested, please come to consult!