When using the open rotary screen printer to print and manufacture, it does not mean that we can print immediately when we have clearly completed the editing and output of images on the computer. It's just that printing can only be carried out after some practical operations, so what practical operations are actually necessary?
1. Set the printing aspect ratio according to the thickness of the raw material. The print aspect ratio of the open rotary screen printer machine and equipment is limited. When the print aspect ratio is exceeded, it is very easy to cause the nozzle to be damaged, damaged,
2. The raw materials that must be coated should be coated as required. Some materials do not need to scrub the coating, some materials must be coated, and the type of coating is also different, please carry out the actual operation according to the training materials of the manufacturer.
3. Printing raw materials that meet the printing specifications of the equipment The packaging and printing width of machinery and equipment is limited. If the limit is exceeded, packaging and printing cannot be performed. Note that the total packaging and printing area of ​​the modified flatbed printer is very different from the total packaging and printing area of ​​the basic theory. Please contact The manufacturer communicates well.
4. Turn on the Hot Air Stenter UV lamp, ink dryer or infrared ink dryer.

The appeal process is about areas that must be paid attention to when printing and manufacturing, rather than printing as soon as the image is written.