4 Star Hotel Furniture Manufacturer introduces the steps of gilding solid wood furniture.

1. The gilding of modern solid wood furniture must first use sandpaper to polish wood, wood glue, and plywood to remove all thin wood strips or protruding mud to fill all holes or defects.

2. Prepare the plaster glue and apply it to the frame with a brush. The color of the first layer of varnish can be used for the brighter gold foil according to the effect you want, the earthy color is used for the classical effect, and the white and gray are used for the silver foil. After a few hours, the plaster surface was polished again with sandpaper and covered with colored varnish.

3. The woodware is ready for gluing. The adhesiveness of the glue can be maintained for half an hour to twelve hours after application, and the gluing can be carried out after one hour. We use white water-soluble gold-based glue. Use a brush to paint on the part to be gilded. Be careful not to drip.

4. In order not to lose its viscosity, do not work in a dusty environment. And protect the treated surface. As soon as the glue dries, it starts to stick gold. According to the area to be covered, gently pick up the gold foil, carefully place it on the frame and use a special to ensure that the coverage of the gold foil is slightly larger than the surface of the frame. Excess raw materials should be wiped off with a soft wool brush. In this way, the gold foil can be properly fixed to the woodware. The corners, curves, twists and other parts are attached with gold leaf later.

5. In the subsequent stage, the varnish layer applied on the product as the base can replace the plaster layer. Catalytic 0% catalyst and 10-20% polyurethane diluted diluent can be sprayed with a spray gun. According to the effect, it can be different colors.