Many users may have problems of one kind or another when using Petrol Log Splitter. The most fundamental problem is nothing but how to improve the production efficiency of Petrol Log Splitter and increase benefits. Here are some tips, I hope to help you.

　　1. Control the gap between the mold and the pressing wheel. After the material is cured at a high temperature, it will be pressed into a shape by the pressing wheel, so that the particles will be dense and beautiful.

　　2. Choose the appropriate mold aperture according to your actual needs. If the aperture is too small, it will cause low output and no discharge, and will seriously affect the production efficiency of Petrol Log Splitter.

　　3. Choose equipment that suits your production capacity, such as the actual output of 1-2 tons. If you choose a machine with an hourly output of 2-3 tons, wouldn’t it be overkill and waste?

　　4. Feeding must be even during the production process, so as to ensure that the Performance Built Log Splitter runs smoothly, and the granulation is uniform and not blocked.

　　 5. Regular lubrication and cleaning. Long-term friction between the mold and the pressure wheel will damage the mold. Regular oil injection and cleaning can not only ensure the cleanliness of the mold, but also reduce the friction between the two, reduce costs, and improve production efficiency.

　　 The above is the content shared for everyone, I hope it will be helpful to everyone.