We will use a variety of tools and equipment when we see the installation of equipment by cranes or hoisting mechanisms, and when we start hoisting in place. Among them, we can see tie down straps sold by the tie down straps manufacturer and some other lifting products.

We often encounter tasks such as equipment loading, transportation, and installation. Whether it is lifting with grab bars or mechanical lifting, we should pay attention to some points. Today we will talk about two of them.

The rolling method used in the civil construction method to load and unload mobile equipment, the thickness of the roller bars should be the same, and the annual width should be 50cm longer than the width of the pallet. It is strictly forbidden to fill the roller bars with gloves. When loading and unloading the truck, the slope of the rolling edge shall not be greater than 20°, the installation of the raceway should be flat and solid, the joints should be staggered, the rolling speed should not be too fast, and a slip rope should be used if necessary.

When lifting large-scale tower equipment with a squeegee, multiple winches must be operated jointly, and the hoisting speed of each winch must be approximately the same. It is necessary to ensure that the force of each lifting point on the tower body tends to be roughly uniform, to avoid uneven force on the tower Deformed.

Of course, other points need to be paid attention to, all of which can be understood one by one.