Flange Insulation Gasket Kit installation process

　　The spacer (inner diameter) is usually slightly smaller than the flange. At installation, make sure the gasket correctly aligns with the center of the hole. This prevents the accumulation between the figures during the cleaning process.

　　Kammprofile Gaskets Suppliers It is recommended to use a single bed insulation sleeve for underground flanges. It should be installed on the profiled side of the flange, which will provide cathodic protection for double bolts and nuts. For the upper flange, it is recommended to use a double gasket for tested.

　　It is recommended to use positioning pins to ensure that the flanges and gathers are correctly aligned. Each pin should be at least 3/32 inches (2.38 mm) of the bolt.

　　Each insulating pads typically come with a chart showing the proposed bolt tightening sequence.

　　Order the information required for Flange Insulation Gasket Kit

　　To order an insulating gasket kit, you need to provide the following information:

　　Flange Specifications (ANSI / ASME, DIN, API, MSS SP44, BSI, AWWA standards)

　　Nominal pipe size, pressure rating, and pore size

　　Working pressure, temperature, and medium

　　Gasket type (D / E / F / O)

　　Required sealing material

　　Isolation sleeve material

　　Isolated gasket material

　　Metal gasket material

　　Quantity