Petrol Log Splitter is prone to wear and tear during use, which can cause damage to the equipment, especially the conveyor belt. Therefore, we must take care of it when handling it. Of course, when the conveyor belt is damaged, we must treat it correctly and find The correct way to deal with it, then we will simply understand from the following, what is the cause of vulnerability? And what is the solution?

Reasons for easy damage of Petrol Log Splitter conveyor belt:

1. The foundation under the driving rod of the conveying assembly is on the ground, and the wood chips pile up to tear the belt;
2. The feed volume is too much, the Petrol Log Splitter is overloaded and there is no time to cut, and the wood and the belt move relative to each other and tear the belt;
3. The tree bark forest and the feeding roller are not easy to be clamped and sent to the cutting position, causing the relative movement of the branches and the belt and tearing the belt.

the solution:

1. Open the foundation discharge hole according to the Petrol Log Splitter installation diagram to avoid the accumulation of debris;
2. Feed materials according to its specified section;
3. Before feeding, remove the bark or the roots of the branches and feed them forward into the feeding port.

This problem is caused by the incorrect use of Chipper Shredder. Therefore, when we use the equipment, we must operate it correctly and not blindly use it. We often maintain the equipment to ensure that it is in use. It can be safer so that we can better guarantee its service life.