Jinhongaaa111

Создал новую статью

3 лет - перевести

What Are The Defects Of Injection Molded Parts? | #injection mold

What Are The Defects Of Injection Molded Parts?

What Are The Defects Of Injection Molded Parts?

Understanding what causes a finished part to not survive the intended environment in which it was designed to operate is critical

Мне нравится

Комментарий

Перепост

Создал новую статью

3 лет - перевести

Several methods of making molds | #injection plastic molds

Several methods of making molds

Several methods of making molds

There are three methods of making molds using injection plastic molds

Мне нравится

Комментарий

Перепост

Создал новую статью

3 лет - перевести

General General Structure Of Mold | #mold part

General General Structure Of Mold

General General Structure Of Mold

it solidifies into the shape of the cavity and becomes the mold part needed for further assembly.

Мне нравится

Комментарий

Перепост

Создал новую статью

3 лет - перевести

The Maintenance Of The Mold Is To Save Money | #Injection mold maker #Mold parts

The Maintenance Of The Mold Is To Save Money

The Maintenance Of The Mold Is To Save Money

The quality and suitability of the mold part together with the mold are important in injection molding.

Мне нравится

Комментарий

Перепост

Создал новую статью

3 лет - перевести

Optimum Placement Of Thimbles | #Straight ejector pin

Optimum Placement Of Thimbles

Optimum Placement Of Thimbles

How to place a straight ejector pin or a sling ejector pin on the mold design? Here are some guidelines for placing thimbles in the mold design. Hope it can help you solve the problem in injection molding.

Мне нравится

Комментарий

Перепост

Загрузка заметок

Информация

0 сообщений
Мужской
-0001/11/30

(0)

(0)

香港区块链协会

Подписчики

(0)

farleymart

johnmillar

kaylee smi

tex zhanxi

pydyka

satery

Logix sagu

ecoturff h

wellnesshu

Нравится

(0)

Продается продукты