You can get three separate electricity services through the Three Phase Energy Meter. A three-phase power connection requires three wires next to a neutral. There must be a 120-degree distance between wires. However, the Three Phase Energy Meter comes in two different types of configurations, star, and delta. Unlike Delta, Star requires ground and neutral. The advantages of the Three Phase Energy Meter connection are:

　　1. It does not need any type of additional starter to perform heavy industrial motors as it has enough power to provide the required torque.

　　2. The more phases of the power supply system, the smoother the voltage of the three-phase power supply.

　　3. The metering system helps to run large machinery well. For commercial and industrial loads, the Three Phase Energy Meter is the first choice due to a large amount of power required.

　　4. It does not need too much conductive material to conduct electricity. Therefore, these meters are a more cost-effective and economical solution.

　　The following is a comparative analysis of Single Phase and Three Phase Energy Meters:

　　1. In a single-phase connection, the current flows through a single conductor, while in a three-phase connection, there are three separate conductors for electrical transmission.

　　2. In a Single Phase Power Meter system, the upper limit of the voltage can be 230 volts, and in a three-phase system, the upper limit can also be 415 volts.

　　3. Two separate wires are mainly required in the Single Phase Power Meter for smooth current flow. But in the Three Phase Energy Meter, the circuit can be done with three phase wires and one neutral wire.

　　4. Compared with the Single Phase Power Meter, the Three Phase Energy Meter transmits the least electrical energy.

　　5. There are two wires in a single-phase meter, making it a simple network. But in the Three Phase Energy Meter, there are four different wires that complicate the network.

　　6. Since there is only one phase in the Single Phase Power Meter, any unexpected event in the network will interrupt the entire power supply. In the Three Phase Energy Meter, on the other hand, if one phase is not working, the other phases compensate for it, eliminating the chance of a power outage.

　　7. A single-phase power meter is less efficient than a three-phase connection because the latter requires fewer conductors, while the former requires fewer conductors for the same circuit.

　　HAINING AEM IMPORT EXPORT CO., LTD is a Panel Power Meter Supplier, the main products are Single Phase Power Meters, etc. Welcome to inquire!