The vacuum pump performs auxiliary vacuuming work on the pump chamber of the fsb-l fluoroplastic pump. When the vacuum degree reaches a certain value, the suction pipe is filled with water and quickly injected into the pump cavity, and the fsb-l fluoroplastic pump starts to work normally to drain. At this time, manual operation is used to turn the clutch lever from "engaged" to "disengaged" state, the clutch will idle and the vacuum pump will stop working. fsb-l fluoroplastic pump is a water conservancy machine for pumping water. It is composed of a pump body, a rotating assembly, an assembly, an impurity discharge cover, a water inlet pipe, a water outlet pipe, and a blocking net. Under the impetus of the impeller centrifuge, the air bubbles surging upward to generate suction, the air in the water inlet pipe is discharged out of the pump body through the water outlet pipe, the air is drained, and the water flows out through the water outlet pipe. This pump has excellent performance and deep suction. , large flow, labor-saving and time-saving operation, it is an excellent water pump machinery in the real society.

The structure of the fsb-l fluoroplastic pump tanker is complex, and there are more failures than the submersible pump. Due to the negative pressure in the pipeline, it is easy to generate oil and gas to form air resistance, etc. The internal structure of the submersible pump tanker is simple and the failure rate is very low. The submersible pump in the storage tank will not break for more than ten years. The pipeline line is also relatively simple, but due to the positive pressure in the pipeline, the sealing requirements of the pipeline are high, and a large amount of oil will be ejected if the pipeline ruptures. Of course, the submersible pump system also has corresponding preventive measures. In addition, the power distribution of the submersible pump is slightly more complicated.

fsb-l fluoroplastic pump is a kind of submersible pump, because most of the submersible pumps are made of cast iron or plastic, it is difficult for submersible pumps made of these materials to meet the needs of customers, and many corrosive media cannot Discharge, such as acid and alkaline liquids, etc.; this is one of its characteristics. Another feature is that in addition to not rusting, it is also resistant to high temperatures.

fsb-l fluoroplastic pump https://www.luolintec.com/Corrosion-resistant-pump