Whether it is a Paint Pail Mould or an oil bucket, the lid needs to be opened before use, and there are tricks to open the lid so that you can open it easily.

Whether it is in a 4S shop or a repair shop, as long as the lubricant is turned on, the bottle cap must be tightened immediately. It should be noted here that because the original sealed tin foil film has been damaged, the best way at this time is to fold it several times with a clean plastic film, cover the bottle mouth, and then screw on the bottle cap. The purpose of this is to make The sealing effect is better. If you have conditions, you can use drip wax to seal, the effect is better.

Second, choose a dry and cool place for storage after sealing, and ensure that the place is out of sunlight. The reason for this is to avoid oxidation of the oil.

Finally, when you need to use the stored oil for the next maintenance, do not pour all the oil, but keep a part of it, because there will be a small amount of moisture in the bottom of the lubricating oil after a long period of storage. If this moisture is added to the engine It will affect its performance, and even produce adverse effects.

The 20L Pail Mould is our representative paint bucket mold. Welcome to consult and contact us to purchase.