Maintenance of idle valves should be carried out together with equipment and piping. Below, 2 Way Ball Valves/3 Way Ball Valves Exporter introduces:

1. Clean up the valve: The inner cavity of the valve should be blown clean, free of residues and aqueous solutions, and the outside of the valve should be wiped clean, free of dirt and oil.

2. Align the valve parts: After the valve is missing, it cannot be dismantled to make up for the west. The valve parts should be arranged to create good conditions for the use of the lower part and ensure that the valve is in good condition.

3. Anti-corrosion treatment: take out the packing in the stuffing box to prevent the galvanic corrosion of the valve stem, and apply anti-rust agent, grease, etc. to the valve sealing surface, valve stem, valve stem nut, machined surface and other parts according to the specific situation. Painted parts should be painted with anti-rust paint.

4. Protection and protection: prevent other objects from hitting, manipulating and disassembling. If necessary, the movable parts of the valve should be fixed and the valve should be packaged and protected.

5. Regular maintenance: Valves that have been idle for a long time should be regularly inspected and maintained to prevent valve corrosion and damage. For valves that have been idle for too long, they should be tested together with equipment, devices, and pipelines before they can be used.

Through the above introduction, KHB Ball Valves/KHB3K Ball Valves Exporter hopes that you can simply refer to the content of this article in future use.