The use standard of open rotary printer and matters needing attention!
1. Workers should hold the relevant post certificate and have the standard assessment of the relevant national departments before they can operate the intermittent rotary machine.
- Under the premise of mastering the performance and structure of the rotary machine, you should concentrate your attention, concentrate on operating the machine and check whether the safety device of the machine is reliable and whether it can operate normally. If there is a fault, it should be reported to the company's maintenance department in time.
- Workers should pay attention to the time of the main machine power closing bell, and then press the "punctual", "reversed", "low speed" or "run" buttons and press the same button after 30 seconds. The machine will immediately rotate and work. The person heard the bell ring and immediately separated from the rotating part.
- If the intermittent rotary machine also needs main maintenance, frequent oil change can reduce the friction between the gears, so as to achieve unnecessary wear of mechanical parts and increase its service life, while improving the effectiveness of the machine.
- If the rotary machine is in operation, if it is necessary to stop, press the work stop button in time, and no artificial stop is allowed to prevent mechanical or personal injury!
- Put the machine in the electrical box. Do not put the machine on it to avoid damage to the machine. It is common for staff to be injured in serious circumstances, so pay special attention when operating!
- If the Flat Screen Printing Machine Factory is an intermittent rotary machine that stops for more than 8 hours and then restarts, it must first be idle at low speed and then operate.
