In manual transmission vehicles, the clutch assembly plays an important role in engine functions. A car with a malfunctioning clutch assembly will have severe symptoms and will be difficult to drive. When there are signs of clutch failure, the problem may be caused by many problems with the various components of the clutch assembly (including the pressure plate). In the case of the correct use of the manual transmission, the clutch should be used for a long time.

The clutch assembly (including the pressure plate) usually does not need to be replaced until the vehicle's mileage is fully entered. However, the wear rate of the clutch depends to a large extent on the driving habits of individuals, including how they use the clutch and under what conditions they usually drive. For example, people who spend a lot of time in heavy traffic or who often travel through mountainous areas need to replace the clutch earlier than those who travel on highways most of the time. The fact is that eventually, the clutch wears out to the point where it needs to be replaced. The pressure plate is an integral part of the clutch assembly, so if you start to notice a clutch failure, it may be related to the damage to the integrity of the pressure plate.

What is the function of the pressure plate?

In the clutch assembly of a manual transmission, the pressure plate or clutch plate works side by side with several other components such as the flywheel and clutch plate. Both of these components help the clutch to engage and disengage when starting a shift and maintaining a specific gear. . speed. In this process, the clutch plates are subjected to a lot of pressure and friction and will become worn over time, especially when the transmission gear is always stressed.

Abnormal noise when using the clutch

If your car shows audible symptoms such as creaking or sanding, the clutch is likely to be severely worn. The noise that occurs when the clutch is released usually indicates that there are problems with other parts of the clutch assembly except the pressure plate-but these worn parts will inevitably affect the function of the pressure plate.

Shaking or vibration when using the clutch

If the pressure plate cannot fully perform its work, the disconnect clutch may cause severe vibration or shake. This is a worrying symptom in manual transmissions. Although it may be related to another problem, a professional should check whether the clutch is damaged.

Taizhou Benwo Auto Parts Co., Ltd. not only has Truck Pressure Plate but also Truck Clutch Disc and other products. Welcome customers at home and abroad to come to discuss cooperation.