After the Vegetable Planter engine is started, carefully observe the smoke color from the exhaust pipe and listen to the sound of the engine. After confirming that the engine is working properly, select the appropriate gear when the clutch is in the state, and then combine the clutch, and the tillage tool starts to rotate. The functional micro-tiller can perform normal field operations. Never force a gear when the clutch is engaged, otherwise it will smash the gear of the transmission box and cause unnecessary losses. If the clutch is unclear, it needs to be adjusted first, and the gear can not be put into gear until the clutch can be separated. When you hold the clutch handle tightly, the clutch is in the connected state. When you do not hold the clutch handle or loosen the clutch handle, the clutch is in a disengaged state. The operation method of the lever clutch is: push the lever forward, the clutch is connected, and the lever is backward. Pull, the clutch is disengaged.

When using the multi-function micro-tiller, please pay attention to check the lubricating oil of the transmission box. Place the micro-tiller on a level ground and take out the screw plug of the oil filling hole of the transmission box. The oil level should be at the lower edge of the oil filling hole. The lower edge of the oil injection hole should be supplemented with clean gear oil. If there is no oil or insufficient oil in the transmission case, the gears and bearings in the transmission case of the multi-function tiller will be damaged within a few minutes. Check if the fuel in the fuel tank is insufficient, make up the fuel. Use gasoline above grade for gasoline engines, and generally use light diesel for diesel engines. When the temperature is below 0℃, use No. 10 light diesel. When Planting Machine refueling, smoking and any sparks are strictly prohibited. Check the water level in the water tank (referring to a water-cooled diesel engine) and add clean water to the water tank until the float rises to a height.