Vegetable planter is also a mechanical device for Vegetable Planter, which is widely used in vegetable planting. Generally, its installation steps can refer to the following methods.　

Connect the vegetable planter assembly and the traction frame assembly with U-shaped bolts M14*35. The screw on the depth adjuster and the handle of the soil adjuster adjust counterclockwise to the end.

　　 Then drag the vegetable Planting Machine to make the traction frame hanger and the tractor hanger pair contact into the ground. According to the height of the ridge and the depth of the ditch, adjust the screw of the seedling depth adjuster and the screw of the soil cover adjuster, and adjust it to the seedling loading depth suitable for the requirements in combination with the seedling depth scale.　　 Then connect the two driving wheel brackets with U-shaped bolts to the traction frame assembly according to the required value of the line spacing.

　　Put the rotating shaft into the transmission bracket, install the sprocket ZB on the hand transmission shaft, install the sprocket ZA on the ground wheel shaft, and then install the chain chain box cover, and fasten the seedling tray and the seat respectively with bolts.